Rebel 16

Rebel 16

Development
Designer	Ray Greene and Alvin Youngquist
Location	United States
Year	1948
No. built	over 4,000
Builder(s)	Ray Greene & Co Melling Tool Company Rebel Industries Spindrift One Designs Nickels Boat Works
Role	One-design racer
Name	Rebel 16
Boat
Crew	minimum of two
Displacement	700 lb (318 kg)
Draft	3.50 ft (1.07 m) with the centreboard down
Hull
Type	Monohull
Construction	Fiberglass
LOA	16.10 ft (4.91 m)
Beam	6.62 ft (2.02 m)
Hull appendages
Keel/board type	centreboard
Ballast	110 lb (50 kg)
Rudder(s)	transom-mounted rudder
Rig
Rig type	Bermuda rig
I foretriangle height	18.00 ft (5.49 m)
J foretriangle base	4.42 ft (1.35 m)
P mainsail luff	22.29 ft (6.79 m)
E mainsail foot	11.12 ft (3.39 m)
Sails
Sailplan	Fractional rigged sloop Masthead sloop
Mainsail area	123.93 sq ft (11.513 m2)
Jib/genoa area	39.78 sq ft (3.696 m2)
Total sail area	163.71 sq ft (15.209 m2)
Racing
D-PN	97.2
[edit on Wikidata]

The Rebel 16 is an American sailing dinghy that was designed by Ray Greene and Alvin Youngquist as a one-design racer and first built in 1948.^[1][2][3]

The design was the first production fiberglass boat.^[3]

The design was initially built by Ray Greene & Co in the United States with 25 sold in the first year, but the company went out of business in 1975, when Ray Greene retired. The boat was built by the Melling Tool Company, Rebel Industries and Spindrift One Designs before production by Nickels Boat Works. That company merged with Windrider in 2015 and it is no longer advertised on their website as being in production.^{[1][3][4][5][6][7]}

The Rebel 16 is a recreational sailboat, built predominantly of fiberglass with some areas with balsa or foam cores. It has a fractional sloop rig with a rotating mast and hard-coated aluminum spars. the hull has a spooned plumb stem, a vertical transom, a kick-up, transom-hung rudder controlled by a tiller and a retractable steel centerboard. The hull has a full foredeck and full-length seats that can accommodate eight people. The class plans show the design with sheer, while the manufacturer's drawings lack the sheer. The boat displaces 700 lb (318 kg) and carries 110 lb (50 kg) of ballast, in form of the steel centerboard.^[1][3]

The boat has a draft of 3.50 ft (1.07 m) with the centerboard extended and 6 in (15 cm) with it retracted, allowing beaching or ground transportation on a trailer.^[1]

For safety the design is equipped with foam buoyancy flotation under the seats and in the bow. It features adjustable jib tracks. Factory options included a mast rotation bar, a boom vang, a Cunningham, a whisker pole and built-in cockpit bailers, as well as hiking straps.^[3]

The design has a Portsmouth Yardstick racing average handicap of 97.2 and is normally raced with a crew of at least two sailors.^[3]

Rebel

Original model^[1]

Rebel II

This model has narrower side decks and a correspondingly wider cockpit^[1]

The design has an active class club, the Rebel Class Association.^[8]

In a 1994 review Richard Sherwood wrote, the "Rebel was the first production sailboat built in fiberglass. Acceptance was fast, and there have been annual national regattas since 1951"^[3]

A 2008 staff report in Sailing Magazine termed it a "tough but nimble little classic".^[7]

• List of sailing boat types

• Media related to Rebel 16 at Wikimedia Commons